PCPartPicker

  • Log In
  • Register

Comments

bsodmike's Completed Build: FreeNAS ZFS Server Build / Intel Xeon E5-2620 v4 / Asus X99-E WS

RhettRO55 1 Build 1 point 4 days ago

Maybe you'll learn some tact and maybe manners one day. I wont hold my breath however.

Mattycakes31's Completed Build: Streaming & 4k60 Gaming Rig

RhettRO55 1 Build 1 point 5 days ago

I see someone who still has a need for an optical drive, I upvote. +1

Man, for your first build you certainly went big. Looks really good, cable management is really well done.

stupidasian94's Completed Build: PowerMac G5 with Ryzen!

RhettRO55 1 Build 1 point 6 days ago

Man this is dope! Love to see builds like this!

Question - where did you get your donor backplate? I'm planning a custom case for consolidating two Mini-ITX servers into a single mATX and I'm not finding a lot of info on the backplate short of making my own.

bsodmike's Completed Build: FreeNAS ZFS Server Build / Intel Xeon E5-2620 v4 / Asus X99-E WS

RhettRO55 1 Build 1 point 6 days ago

No im just someone who tries to help this site grow and prosper as opposed to being crass and brash. Perhaps you would be better suited on Reddit?

bsodmike's Completed Build: FreeNAS ZFS Server Build / Intel Xeon E5-2620 v4 / Asus X99-E WS

RhettRO55 1 Build 1 point 6 days ago

Yeah sorry bud, im too old to be a millennial. And Ive been building PCs for over 25 years so I feel it safe to say that I am much more knowledgeable than you are. Also I bashed your criticism because you come across as rude and entitled that your opinion is so important that it negates the ability to convey your opinion without being a complete douche.

kirijo1911's Completed Build: my hifi and gaming rig

RhettRO55 1 Build 1 point 7 days ago

That kind of point can still be made without coming across as "I know everything, your build is crap, heres what you did wrong" etc.

legendarypoet's Completed Build: Nineteen Fifty X

RhettRO55 1 Build 0 points 7 days ago

Who are you to be "grading" anyone's build? Are you supposed to be a PC building authority?

kirijo1911's Completed Build: my hifi and gaming rig

RhettRO55 1 Build 2 points 7 days ago

Ok since you are very new here, this kind of attitude and commenting is usually frowned upon. Also you're coming off as very arrogant and very rude to just toss out all of these brash comments without having anything remotely nice to say about this build.

Also VRAM on GPUs doesnt stack when they are in SLI.

bsodmike's Completed Build: FreeNAS ZFS Server Build / Intel Xeon E5-2620 v4 / Asus X99-E WS

RhettRO55 1 Build 1 point 12 days ago

You make these comments, yet you've been a member of this site for 2+ years and have not posted a single build.

TDP can change, would TDP of a cooler not be the same if no fans were installed vs a 500RPM fan vs a 1500 RPM fan? My apologies, I meant to say it is NOT explicitly stated because it is not a static measurement.

bsodmike's Completed Build: FreeNAS ZFS Server Build / Intel Xeon E5-2620 v4 / Asus X99-E WS

RhettRO55 1 Build 1 point 12 days ago

The TDP for the 212 EVO is explicitly stated within its specs, because its TDP is not a static measurement, it is based on the type, RPM rating and number of fans you choose to use. Also since it states it can be used for 2011-V3 chips and none of those are below 110w then one can safely infer that OP can use the 212 for his Xeon.

You make that 2nd comment still stating there is improvement needed, yet your comments seem to have a pattern of being rather critical instead of positive, this site is based upon positivity and not trying to find the faults in someones builds.

bsodmike's Completed Build: FreeNAS ZFS Server Build / Intel Xeon E5-2620 v4 / Asus X99-E WS

RhettRO55 1 Build 1 point 13 days ago

You really didnt manage to have anything nice to say about this build, all youve managed to do is complain and critique. Also a specific chip being server grade has absolutely nothing to do with its ability to be cooled effectively by any cooler, its about the specific TDP of the chip itself and the total TDP capability of the cooler. The E5-2620 has a total TDP of 85 watts which is well within the range of the cooling capability of the 212 EVO. Maybe try to be more constructive and do a little research before tossing out baseless criticism?

bsodmike's Completed Build: FreeNAS ZFS Server Build / Intel Xeon E5-2620 v4 / Asus X99-E WS

RhettRO55 1 Build 1 point 13 days ago

Just saying there is nothing wrong with 5400 RPM drives, especially on a single user situation.

nycdarkness's Completed Build: I know it's AMD RED The counter part to my other build.

nycdarkness's Completed Build: I know it's AMD RED The counter part to my other build.

RhettRO55 1 Build 1 point 17 days ago

Ahhh ok, now it makes sense. I figured it was since those and the HoF edition cards are usually the ones that go balls-to-the-wall power hungry.

nycdarkness's Completed Build: I know it's AMD RED The counter part to my other build.

RhettRO55 1 Build 1 point 17 days ago

Great build, love the carbon fiber and the custom paneling. But your GPU confuses me a bit, the 980TI only has a 6+8 pin power plug but your pics have a GPU with an 8+8+6 pin power config ...

davenator49111's Completed Build: My First Build!

RhettRO55 1 Build 1 point 18 days ago

This is a very good build, very solid choice of parts for your first build and it should perform very well and last for a very long time. My only critique and this is coming with a large amount of "its OPs first build, they will learn as time goes on" is that your cable management is in need of a LOT of work, especially in a case that huge. Aside from that well done.

berke3690's Completed Build: First built gaming desktop

RhettRO55 1 Build 2 points 18 days ago

Ok here we go, if anything I suggest or say is confusing let me know and I'll try to explain.

First off, I think you have a very good motherboard, I personally didnt see a ton of reason to go from Haswell/Broadwell to Skylake. To me, you got the option for DDR4 and aside from that not a ton of other upgrades, unless you truly needed a ton of super fast IO for M.2 or NVMe storage which a the vast majority of people who upgrade from 1150 to 1151 didnt really take a huge advantage of. I personally really like ASRock boards, I have the Pro6 variant of yours in my main desktop rig, as well as 3 mini-ITX ASRock boards w/ G3258s running my 2 servers & my MediaCenter DVR/Plex box and they have been running 24/7 for 2+ years with no issues whatsoever. So as far as mobos go, Asus & Gigabyte have earned their reputation but I would personally keep what you have, there isnt anything wrong with it, has a large number of features and options that would allow you to upgrade it without having to shell out entirely. If you do want to upgrade, that would be an entirely different conversation and a budget ceiling would be something Id need to know. If you are interested in streaming and dont want to rebuy/build everything, I would suggest

1 - Go for a 4790K, still a fairly coveted CPU and Intel still offers a $20 insurance overclock policy where you register your CPU, pay them $20 overclock it until your heart is content and if you blow it, they'll replace it. You can see how the 4590 does for you for the time being and if it allows you to stream at a quality that is satisfactory to you then you could save this upgrade to last.

2 - Double (at least) your RAM. Your board supports 32BG max and you have some room to grow. Streaming, depending on the quality of the content you are putting out, can get RAM hungry. And 8 GB is really the minimum now for a desktop build, especially one that is centered around more than standard day to day web browsing etc.

3 - Get an SSD or and SSD RAID combo. OS on an SSD is pretty much standard practice now and it will increase your boot speeds and overall experience vastly. Your board supports RAID and Id get a few 250GB SSDs and put them in a stripe RAID (RAID-0) for increased performance, can be done for about $150, and it will allow you to install your streaming software on that specific disk and will allow for much faster read / write speeds. Just keep in mind that this is a stripe RAID, so data is written across each disk, so part of a file might be on both drives and if one disk in the RAID dies, the entire data set is gone so dont put any crucial data on their that isnt backed up somewhere else.

4 - Potentially a more powerful GPU. Your card only has 2GB of VRAM on it and that might be a bottleneck for your stream. But again, see how it works and if necessary upgrade.

Ok as far as the fan switch/hub/controller goes, Ive never personally been a fan (please excuse the accidental pun) of those big double 5.25 controllers. They do offer on screen control of each individual fan that is plugged into them but they IMO tend to take away from a sleek aesthetic. But if that is something that interests you the NZXT Sentry line is pretty good and not terribly expensive. I prefer (again, totally up to you and your tastes) a "passive" fan controller like the Silverstone CPF04 PWM Fan Hub because its inexpensive, unobtrusive and will power more than enough fans and can be controlled by the motherboard w/ custom fan curves.

M1NiSTrY's Completed Build: 10-core Intel i9 workstation

RhettRO55 1 Build 1 point 25 days ago

Was going to say "In before WHY DID YOU BUY INTEL VS THREADRIPPER OMG BUILD IS RUINED NOW STUPID HOBBIT" but it appears I am too late.

This is a very nice build, very clean and concise. I was curious about the single strangely placed RGB strand until I saw the rest of the build and how it acted like underglow for the front panel. +1

berke3690's Completed Build: First built gaming desktop

RhettRO55 1 Build 2 points 28 days ago

It depends on your budget as well as your taste for aesthetics and whether or not you care about noise levels.

Noctua make some of the best fans many can buy, they are quiet, efficient and will stand the test of time, but they only come in 2 colors, their signature burgundy / beige and black/grey. Some people usually use their fans as a way of showing "Hey, Ive got this bad mutha air cooled and quiet and this is how I did it", kind of like a giant blower intake on a drag racer. They are also fairly expensive.

Corsair makes a very good fan as well, static pressure (SP) optimized for radiator support & air flow (AF) meant to just get as much air movement into/out of a case as possible. Their AF/SP120 line is what I used to replace the noisy stock Corsair fans on my H80i and even when I am rendering/converting with Handbrake/Adobe I can tell no difference in actual noise level and my 4790K stays at or below 60 even when all 8 threads are maxed out at 100%. They are a bit cheaper but still kind of pricey, I believe I paid ~$30 for a 2 pack but that was about a year ago.

If price is your concern but you still need something that will perform, then the CoolerMaster Value 4 Pack on Amazon for a whole $12 is a fairly solid purchase. I usually keep about 3 boxes of these in my office for customer builds, I can offer them a fix/upgrade on old stock case fans when they bring me a 10 yr old PC for relatively cheap, and they are also insanely quiet (provided you have them connected to some sort of controller/mobo instead of directly off of the PSU).

If RGB is your thing I have little input to give as that is something that never floated my boat. Aside from all of that as long as the fan has decent reviews and doesnt have a huge noise level and decent CFM, you really cant go wrong. Read reviews and see what strikes your fancy.

One more thing, if you have the option, always go with a larger fan, if the case will fit either a 120 or a 140, always go with the larger fan, it will provide better/quieter/more efficient cooling over the smaller fan. My current case on my main build has 200 & 220 fans and they are insanely quiet even under load so its hard for me to do my upgrade.

Good luck, if you have any other questions dont hesitate, I'll do what I can to help.

SebCovert's Completed Build: Stealth - PC Build/Gaming Setup

RhettRO55 1 Build 1 point 1 month ago

Well ... its stealth allright, good list of parts but it really needs a lot more pictures.

berke3690's Completed Build: First built gaming desktop

RhettRO55 1 Build 3 points 1 month ago

Not bad, decent little budget build. +1

How are you running/powering the fans? Mobo? Directly off of the PSU? I dont see any additional fans in your parts list so Im guessing you're using the stock fans that came with the case? Manufacturers usually tend to cheap out on those, especially a budget case that isnt geared towards a large component list. If they arent run off of the mobo with either speed control or PWM then they will pretty much always run at full speed. When the mobo then does manage to crank up its other fans (GPU, CPU cooler) then it will only add to noise already created by anything else.

NochemnO's Completed Build: TROUBLE

RhettRO55 1 Build 2 points 1 month ago

Total price is cumulative, its based on the prices you let the part picker automatically use instead of manually inputting the price you actually paid.

MikeyMetalcore's Completed Build: Ryzen 7 4k Build

RhettRO55 1 Build 2 points 1 month ago

Sallright :-D

MikeyMetalcore's Completed Build: Ryzen 7 4k Build

RhettRO55 1 Build 2 points 1 month ago

Not my build :-)

MikeyMetalcore's Completed Build: Ryzen 7 4k Build

RhettRO55 1 Build 3 points 1 month ago

The vast majority of gaming is performed once the game is loaded into RAM unless its something that constantly has to load and reload locations and different bits of data, so those different drive speeds are usually what affect game load times, not so much the gaming experience. Otherwise anyone on console would have the same issue since PS4 & XB1 both ship with 5400 RPM drives.

IllOO's Completed Build: NCASE M1 'Project AKIRA' SFF High-End PC

RhettRO55 1 Build 1 point 1 month ago

Yeah they are!! I mean thats pretty awesome, never seen that before and hadnt thought of that before, def gonna have to add that to my list of tricks. Im alllll about a custom build being aesthetically pleasing so thats def a plus! Guessing the difference in reception is negligible/unnoticed?

IllOO's Completed Build: NCASE M1 'Project AKIRA' SFF High-End PC

RhettRO55 1 Build 2 points 1 month ago

There is literally so much awesomeness crammed into this build .... you even rerouted the external antenna back into the case???

(In my best George Takei voice) Ohhhh myyyyy

Well done, this is freaking amazing!

whatinthesam's Completed Build: First PC v1.0

RhettRO55 1 Build 1 point 2 months ago

Not bad, really stout list of parts for your first build. Are your front case fans3 or 4 pin? Either way if you dont want a ton of control over them and just want them to work, you can get a 1-2 fan splitter for like $3 and just have them both work. If they're PWM (4pin) and you want them to be controlled by the onboard fan controller youd have to spend a bit more, like $10 for a PWM fan controller. Not a huge deal but it'll let you add more fans to your PC without having to use the janky molex adapter that makes them run at a constant speed 24/7. +1

FedorKruglov's Completed Build: Atomic Blue

RhettRO55 1 Build 2 points 2 months ago

Sometimes the simple mods are better than the giant flashy expensive ones.

FedorKruglov's Completed Build: Atomic Blue

RhettRO55 1 Build 2 points 2 months ago

This is so dope! Everything looks great, mods are insane. Dont care about the "underpowered" hardware, still feel this is a great build! Only regret is I have but one +1 to give!

askinglotus's Completed Build: My First Gaming Computer

RhettRO55 1 Build 1 point 2 months ago

Really?? Thats incredibly odd. All 8 pins were being used from one of the 6+2 plugs??

askinglotus's Completed Build: My First Gaming Computer

RhettRO55 1 Build 1 point 2 months ago

Not bad, needs some more pics and a bit more in the description.

Question as to why you are using a GPU power adapter instead of the plugs that are standard on the PSU?

Annagracee's Completed Build: First PC Build

RhettRO55 1 Build 1 point 2 months ago

Safe mode allows you to pretty much retract any and all GPU OC changes you may have made erroneously that caused your PC to BSOD. Some GPUs even come with a dual bios jumper switch so if you did mess it up all you literally have to do is change the switch and your back up and running.

Annagracee's Completed Build: First PC Build

RhettRO55 1 Build 1 point 2 months ago

You have a 1070, so overclocking a GPU is about as standard as OCing a CPU as MSI Afterburner literally requires nothing but for you to move sliders to change settings.

Annagracee's Completed Build: First PC Build

RhettRO55 1 Build 2 points 2 months ago

You'll get there. Take your time, tech changes so rapidly that it can get daunting trying to keep up with everything, especially if you dont work in IT or something IT related.

Annagracee's Completed Build: First PC Build

RhettRO55 1 Build 2 points 2 months ago

Not if its your very first build ever.

Annagracee's Completed Build: First PC Build

RhettRO55 1 Build 1 point 2 months ago

Good luck with that. I finally decided my SLI 580s werent cutting it, so I barely managed to get playable FPS on modern titles with a 680. Decided that it was time to finally upgrade to something more modern but then I saw the pricetags of anything that isnt a 1060/1050TI and had a small heart attack. Lucked up on a 690 instead on Craigslist for $150 so hopefully that will hold me out for a little while.

Annagracee's Completed Build: First PC Build

RhettRO55 1 Build 1 point 2 months ago

Again, its their first build. Maybe they wanted to get their feet wet before trying something a bit beyond standard usage?

Annagracee's Completed Build: First PC Build

RhettRO55 1 Build 2 points 2 months ago

Very nice! Great build to start off your new addiction on! Solid selection of parts, room to grow and expand as your needs and desires change. Keep it up +1

(Would love to see a few pictures of the build, maybe some of the things you learned during the build to be included in the description).

sekhemet3's Completed Build: Phanteks RGB My First Build

RhettRO55 1 Build 1 point 2 months ago

Nice wallpaper, needs some more pics but a very nice build.

FlashTS's Completed Build: My DeathStar²

RhettRO55 1 Build 2 points 2 months ago

I lived through the neon cases and cold cathode tubes when StreetGlow bled over into PC builds, never been a fan. Only reason I have lit fans in my builds are usually because they come with the case. I get they have their place but I see so many people building moderate/mediocre builds with budget in the title but spend 1/4 or more on their aesthetics and their parts selection suffers because of it. Kinda like putting racing stripes and flame decals on a Honda beater.

RhettRO55's Completed Build: MegaMan

RhettRO55 submitter 1 Build 1 point 2 months ago

Not sure what you mean by the pixels being very noticeable, never had anyone ever ask me that kind of question. Every monitor has "noticeable" pixels if you put your nose on the glass/screen but sitting back by about 3 ft when gaming or 1-2 ft when doing regular work i have never said to myself "huh, I can see the pixels".

But to be completely honest, its a great monitor for what it is, a budget UW 1080p IPS Display. Its fantastic for the money, but im also not the kind of person that has to feel my eyes bleed from eye-gasmic 1440p or 4K resolution at 200+FPS w/ 120Hz refresh. So for me, having used dual 16:9 1080p monitors for about 10 years it was kind of nice to go from 2 to 1. If you are a different kind of person, I might say at least go for a 1440p variant. Only reason I went with this over something more spec intense was because I was selling off old PCs and parts to build this entire rig, so an actual budget caused me to go with this instead of being able to afford a $1000 monitor, which is just too much IMO.

Zachle37's Completed Build: Falcon Blue. My first budget build.

RhettRO55 1 Build 1 point 2 months ago

1050TI @ 1080p is no slouch, will cook some FPS in a heartbeat! Very nice budget build, looking forward to some more pics. Well done!

LOVEFISTist's Completed Build: Black & Red Gaming Machine

RhettRO55 1 Build 1 point 2 months ago

Very nice, incredibly clean, cable management is on point! Great selection of parts, not a single HDD in sight! How do you like the ElGato HD Pro? I used to have an original external but I sold it for a BlackMagic Shuttle Intensity that I sadly have not used yet :-( All in all a great build, need to take that description to the all-you-can-eat buffet and stuff it a bit.

zprater's Completed Build: "The Wife Eye-Roller 1700X" Ryzen/1070/Fractal Design/Corsair RGB mATX Dream Come True

RhettRO55 1 Build 2 points 2 months ago

Very nice! Great build, great use of space. Love you vented the top of the enclosure for the Xbox One. I see so many people putting consoles inside of cabinets with maybe 1 opening and little ventilation. Well done! Also congrats on the supportive and understanding wife, having one of those makes a love/hobby like this a lot more realistic.

Side ? - I have the same microphone but wanted to put it on a boom, do most boom arms come with the standard threads it uses or did you have to get an adapter?

Zaazu's Completed Build: Original XBOX Computer.

RhettRO55 1 Build 2 points 2 months ago

Totally doable, this should help get you started, give you some ideas.

https://www.youtube.com/watch?v=TggHtINGIyc

RhettRO55's Completed Build: MegaMan

RhettRO55 submitter 1 Build 1 point 2 months ago

Welcome! Let me know if adding that 4pin fixes your SLI issues.

RhettRO55's Completed Build: MegaMan

RhettRO55 submitter 1 Build 1 point 2 months ago

Nope, regular standard old 4 pin molex. Might not hurt to have it connected to the mobo and only it connected to the mobo. I ran into clearance issues with my case because of the orientation of the plug and it having literally no clearance between the bottom of the board and the top of the PSU/shroud but from your screenshots it looks like you actually have a bottom I/O cutout on your case that will make it a lot easier. Thats a lot of dope A/V equipment you have there btw.

RhettRO55's Completed Build: MegaMan

RhettRO55 submitter 1 Build 1 point 2 months ago

I didnt have any issues with it from day 1, granted I do have that additional molex plugged into the bottom of the board, but I had to chop shop the bottom of the power supply mount to let that cable pass through. Figured better to go ahead and have it in instead of having to tear everything out because that 1 cable was critical for something basic (???) and not having it would have caused me to set the entire PC on fire.

What kind of issues? Are they specific to a particular game/program? Ive had issues in the past on other mobos, usually it was something inane like take GPU 1 in slot 1 and put it in slot 2 and GPU 2 into slot 1. Or for some reason, flip the SLI bridge sometimes seemed to work?

xianyangwong's Completed Build: My First Gaming Build

RhettRO55 1 Build 1 point 3 months ago

Its a non-K SKU CPU, not overclockable.

Page
1
·
·