PCPartPicker

  • Log In
  • Register

Comments

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 1 point 23 days ago

It fit in just fine for me, didn't have any problems with it.

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 1 point 1 month ago

Vortexgear Pok3r RGB

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 2 points 1 month ago

I would go 600mm just to be safe, yeah.

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 1 point 1 month ago

No, the cablemod cable lengths are enough. I only got the ensourced extensions as a temporary solution. Once I received the cablemod cables, I took the ensourced extensions out. :)

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 1 point 1 month ago
  1. Yes, you can't control the fans individually. Doesn't matter in my case, all the fans I plugged into it are 3pin, anyway! If I do plug in extra 4pin ones, I can set a curve and it will only apply to those 4pin fans, because the 3pin fans will always run at max fan speed.

I plugged it into the chassis fan header on my MB so it shows up in the BIOS as CHA_FAN, which is how I control it.

  1. For cable lengths, you can check out the link I have on top. It includes all the lengths I ordered. The ones from ensourced are actually extensions, not cables. They were a 300mm 24pin, and 400mm 6+2pin.

The pics on this page are actually final and what I have right now. The only difference is on the last pics I have 2 SSDs mounted behind the motherboard. The cables are pretty much the same. I'll try to take a pic when I remember to! :)

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 1 point 2 months ago

uhm the card I have right now is an old gtx 660. I'm still waiting on the 1080 TI. :( The cooler install was easy peezy. The main difference I noticed between the two coolers is how much quieter the Cryorig is. I was only using one fan on the Phanteks also so it's a fair comparison. The temps are 5-10C cooler for me also!

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 2 points 2 months ago

Hey there!

It's running great, I love my little PC. The case came with a 2-to-1 fan splitter for the 2 included fans. I don't use it since I have the Silverstone hub. Also, I installed the GP14 and my Cryorig H7 will be delivered today. I'll use Arctic MX4 on it, and will see how much of a difference this duo is compared to the Phanteks TIM and cooler.

This case is fantastic. Only problem was I found one of the screws on the bottom bracket to be super tightened. I was struggling for 2 nights to unscrew it. But otherwise, it's pretty straight-forward to build in. Everything goes in place as it should. :D

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 2 points 3 months ago

Yup, the clear side panel is good looking. Hoping for a speedy shipping route!

I chose the Acer because I read that their quality control is better than the ASUS. They're both IPS panels and suffer the same issues. My monitor has slight glow on the bottom right, but its only noticeable when gaming in the dark or watching a dark scene. It's also not an issue if I set the brightness to <60. Currently at 40 brightness.

I didn't consider the Dell because it was a TN panel, and to me I value the colors more than response time. Since I'm not a huge FPS gamer, the 3ms difference in response time won't ruin my gaming experience.

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 1 point 3 months ago

30fps stable, I hope! ;)

Alooshka's Completed Build: Monochrome Nano S

Alooshka submitter 1 Build 1 point 3 months ago

Haha I know!!! I kept changing fan positions and all that jazz.

molnarg's Completed Build: RGB Nano S

Alooshka 1 Build 1 point 3 months ago

Thanks for the measurements! The album is a big help, too. :)

molnarg's Completed Build: RGB Nano S

Alooshka 1 Build 1 point 3 months ago

I have a really, really similar build in the works right now. Yours looks amazing. What are your cablemod lengths? The stock SF600 cables are so god damn irritating to work with. :/

ucelik137's Completed Build: Nano S with Red Devil rx 480 and SF600

Alooshka 1 Build 2 points 3 months ago

Thank you friend! :)

ucelik137's Completed Build: Nano S with Red Devil rx 480 and SF600

Alooshka 1 Build 1 point 3 months ago

Is the 24-pin the only cable that needs an extension? im building on the same case with that psu!

Page
1