|( 1 new from £232.05 . Last updated 25 minutes ago. )|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.co.uk at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
- 300 mm / 11.811" With Drive Cages
- 420 mm / 16.535" Without Drive Cages
Internal 2.5" Bays
Internal 3.5" Bays
- 33 points
- 35 months ago
from completed build Frostbite
Great looks but poor performance when it comes to cooling. 1 of the front fans died just 2 years after owning the case. The fluid was leaking all over from it. Lucky my internal parts didn't get ruined. Cooling options aren't the best with an AIO. The top portion isn't very roomy and covers the board a good portion. Some RAM will hit the radiator which isn't good either. The top cooling with a radiator is subpar. It traps a lot of heat. With all air cooling though, the case is awesome.
For AIOs or other cooling, go with a fully vented top.
- 31 points
- 47 months ago
from completed build RGB Sloth
The best looking case I found. A breeze to work in, and plenty of space. Enough space to even add a custom water cooling loop soon. I wish the glass stayed clean better, as it seems to pick up dust quite easily. The biggest flaw is the top cavity which has plenty of room to fit fans or a radiator, but is instead closed off. With a little modding though, you can fit one or the other.
- 31 points
- 39 months ago
from completed build Snorlax (MKIII)
Fantastic case. I removed the 3.5 inch drive bay from the basement of the case so I could route my front SSD cables to the right so the drive is facing the right way up. I don't know why Phanteks doesn't make this easier. You basically have the choice of upside down ssd and 3.5 inch bay, or right side up SSD and no 3.5 inch bay. Oh well. Also, there isn't anywhere to mount a hue+ once you remove the 3.5 inch bay below, so I ended up screwing mine into the bottom of the case through the mounting strips and holes for a pump, which works fine. The built in velcro ties are fantastic, and build quality is top notch. Highly recommend, despite the idiosyncrasies of design.
- 23 points
- 49 months ago
from completed build Skylake Anthracite 2016
By far the best case I've ever owned. Everything about this case is top notch, from the packaging to the case itself. The only issue I've had so far was getting the PWM fan controller and my Motherboard to cooperate with each other. Hooking the fan controller to the CPU_FAN header as instructed by phantek resulted in the MB not being able to detect a CPU fan and preventing a bootup. Some swapping around of fan headers was needed
- 17 points
- 40 months ago
from completed build Fathe and Son Holiday Build
Just a great case. well built and easy to build in with plenty of room and cable routing options. worth every penny.
- 13 points
- 51 months ago
from completed build Laniakea
Beautiful case, not enough tie down points in the back for cable management, but I'm a sucker for form over function. The finish on the black model leaves noticeable fingerprints and shows dust too well. Easy enough to clean with isopropyl alcohol but still annoying having to wear gloves when handling it.
- 6 points
- 45 months ago
from completed build Silver Thing
Beautiful, plenty of space, good space for cable management, the case fans are surprisingly good. They aren't stupid loud or weak, I am very impressed.
- 6 points
- 39 months ago
from completed build Evenfall
HardwareCanucks case of the year, what more can I say?
- 5 points
- 38 months ago
from completed build Arctic Thunder
This case is awesome and looks great! I am not a fan of huge gaudy cases. This case looks super clean and minimalist but has all the features you can want. I have a 280mm radiator on the top and it fits perfect. There is plenty of space for cable routing and I was able to route LEDs around the case as well! I love the fan hub just make sure you plug it into a PWM header. The first mobo I put in here had no PWM header so it did not work. IF your mobo doesn't have a PWM header you can plug in into your CPU fan head and plug your CPU fan into the hub. I did this until I bought my new motherboard!
PROS -Looks great -plenty of room -great airflow -fan hub
Cons -Fan hub can only plug into PWM header
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters