• Log In
  • Register


Gigabyte - GA-Z170X-Gaming 7 ATX LGA1151 Motherboard

( 4.5 Average / 28 Ratings )





GA-Z170X-Gaming 7

Part #

(or) GA-Z170X-Gaming 7
(or) GA-Z170X-Gaming7-EU
(or) GA-Z170X-Gaming 7 (rev. 1.0)


Black / Red

Form Factor


CPU Socket



Intel Z170

Memory Slots

4 x 288-pin DIMM

Memory Type

DDR4-2133 / 2400 / 2800 / 3200

Maximum Supported Memory

64 GB

RAID Support


Onboard Video

Depends on CPU

CrossFire Support


SLI Support


SATA Express


Onboard Ethernet

2 x 1000 Mbit/s

Onboard USB 3.0 Header(s)


Completed Builds Using This Part

See All Completed Builds


Prices for this part are not available.

Price History (Excluding Tax) History:


geek39 17 points 41 months ago
from completed build Geek's Skylake PC

this motherboard has everything you could ask for.. feature per feature wise, you can't go wrong with this. it has plenty of OC features plus good looks that matches with the cases you are planning to put up with makes this board bestseller.

fantmxt 9 points 39 months ago
from completed build My first Intel build

I RMAed the first board I had but it was NOT at fault. This board looks cool but also has a ton of features. I haven't built a system for a few years but I'm pleased to see they're making so many cool looking boards that allow you to make eye pleasing combinations of hardware. Looks are nothing when it comes to performance but I find myself choosing pieces based on the hardwares ability and what it looks like as well.

adobo 38 points 39 months ago

Some of the reviews online were scaring me away from this board, but I love it. This is my third Gigabyte board, but first intel based one. It shipped with the F5 BIOS but I quickly upgraded to the F6 as soon as I got my first POST. I have had no issues with it so far, and it was a breeze to install. Plenty of connectors, and the manual is decent. The Gigabyte App Center has some cool apps and the BIOS GUI is pretty simple to navigate. The board detected all of my hardware just fine, including my m.2 NVME 950 Pro stick. Just be aware of how M.2 shares PCIe lanes with SATA. If you only have one M.2, use the M.2 connector on the bottom, it uses up less SATA lanes. If you have 2 M.2 connected, you will lose all but SATA_5 on the Intel SATA controller, but Gigabyte provides 2 additional SATA connectors with a secondary SATA controller (SATA_6 and SATA_7). You just cannot RAID SATA_6 and SATA_7.

Windows 10 installed just fine, I enabled the Windows 8/10 mode in the BIOS and have "Ultra fast boot" turned on. The system loads in less than 10 seconds from power up. You can even customize the startup logo with the gigabyte App.

This board also comes with 2 Ethernet controllers. Great for hosting VM's.

CoopBro 33 points 38 months ago
from completed build Hatchling

Awesome motherboard! I like that the debug LED helped me figure out what was wrong when building (I had to reinstall the RAM) and it was fine after that.

It looks really sweet, but the colors aren't that common, so I have modded my case to match it (a little) and it has plenty of connectors for my needs, almost too many wishing I had gone with a MATX mobo, would suit me just fine.

Tip: Go to Gigabyte's website and download the app center for 170 chipsets and install system viewer and the one where you can edit the LED without needing to go into the BIOS, as well as anything else that you may want, who knows if you may need it. There is also the overclocking utility that allows you to adjust BLCK, core multiplier, and voltage without needing to enter the BIOS and restart.

-1 star because the tab on the first PCI-E slot is broken, you have to pry the card so hard to pop out the tab to get it out of the slot, it's really nerve racking, good thing I don't have to do it much

Randon_Guy 9 points 38 months ago
from completed build Virgin Corsair 550D Skylake Build

May be me but the only fan header that gives direct control is the CPU one, bit disappointed at that.

3 of the fan headers are unreachable with the CPU cooler fitted, not really the MB's fault but a pain in the a**

Trying to decipher which SATA is which from the destruction book melted my head.

Carrying on the destruction book reads as if its been translated from Korean to English, back to Korean and then given to someone who's native language is neither of these two to translate back to English.

XPM has got my RAM playing nicely at full speed

FAST boot seems to be just another name for NORMAL boot ULTRAFAST boot shaves a whole 3 seconds of boot time and handily stops you getting in to the BIOS (BIOS accessible via software or reset)

First build, seems like a lot of connections on the motherboard should be configured at 90 degrees of at least angled to put less strain on them.

MA1NFRAM3 17 points 37 months ago

The reason I chose the Gigabyte motherboard was value. My choices came down to the Gigabyte, ASUS ROG MAXIMUS VIII HERO, and MSI Z170A Gaming M7. All three are excellent and receive high marks in reviews, but the Gigabyte offered the best I/O connectivity and integrated sound processing.

The CPU (Intel i5-6600K), motherboard and memory (G.Skill TridentZ Series 16GB DDR4-3000) all were installed and configured with no issues. Following the advice of others, who had installed this combination before me, I flashed the BIOS to an updated rev before I booted the system. This was key in to allowing the memory to run correctly using its XMP profile. I was able to achieve a 4.0GHz overclock on stock voltage. I have not had any issues with Windows 10 and the Gigabyte drivers.

The only issue I have experienced with this board is the sound processor will periodically output distorted sound and can only be remedied with a system reboot. This has only happened twice in three months, but is annoying none the less.

dill_grover2 17 points 36 months ago
from completed build Speed=M.2*2

What a great motherboard. No issues at all with the build, once i figured out the CPU power was not optional. What can I say, this was my first build ever. I plugged in the first M.2 and got the machine up and running and Win 10 installed before i tried installing the other drives. This approach worked without a hitch.

moodster12 15 points 35 months ago

This is a fantastic motherboard. It'll have everything you'll need...except fan ports, it only has 3 of them..to my six fans. My only complaint though; it was an easy fix, just had to buy some adapters to run my fans straight from the PSU. (This motherboard also has custom RGB lighting) :)

wisemanofhyrule 10 points 34 months ago
from completed build Agrippa

This motherboard is great, all the features I needed, a great color scheme and the sound on it is quite good. I couldn't screw in the upper right screw, it did not seem to catch. I'm not sure if that is the fault of the case or the motherboard. You can only set 1 XMP profile for all 4 sticks of ram, not individually or in the groups of 2.

immefrank 7 points 34 months ago
from completed build NZXT Razer VR build

Good for OC, didn't need any of the features in the Gaming 1.