Description

Used for HQG using After Effects & Mocha, Gaming from newish releases to anything old, programming and hobbyist software development and visual canvas programming.

Comments

  • 31 months ago
  • 2 points

This is ghetto but in another level LOL

  • 31 months ago
  • 1 point

Haha that second picture made me laugh so hard. Too amazing

  • 30 months ago
  • 1 point

Try showing friends and keeping a straight face :D

[comment deleted]
  • 31 months ago
  • 1 point

Wow an Fx-9590 not be people used these, nice.

Love dat cooler positioning.

  • 30 months ago
  • 1 point

Thanks :D

  • 31 months ago
  • 1 point

Damn this is some Frankenstein cooling if I have ever seen it. You should pay a little more respect to the price of your parts and the glory of that 9590 and really clean it up some. Just saying. But for a total cost of 0.00 I guess you can make it look however you want without concern.

  • 30 months ago
  • 1 point

Pics don't match ;) the cooling does look ghetto but is effective, I pay it alot of respect and worked for being able to afford it :)

  • 31 months ago
  • 1 point

lol i was going to say that air cooler is definitely not adequate for that cpu. i have a 9590 and its a heater. but i love it anyway. awesome "rigged" rig

  • 30 months ago
  • 1 point

The Nepton is more than suitable if it's done right, trust me :)

  • 30 months ago
  • 1 point

Just an FYI as some peeps haven't noticed the cable mess is an older pic with older parts, 8350 and r9 380 to be exact. Its alot less hoarder style mess now :)

  • 30 months ago
  • 1 point

So after a routine clean readjustment of sensors the cpu temps seem to have got a little more realistic, 15 idle and 30 - 35 full load with prime. Should be noted that under load the readouts tend to be more accurate than the lower temps, Remember being told or reading somewhere that sensors tend to be more reliable under higher temperatures?

  • 29 months ago
  • 1 point

Do the 2 GPU fans spin together at 60c? or only 1

and did u had any issue with it?

  • 31 months ago
  • 0 points

dat cable management...

  • 30 months ago
  • 1 point

See reply below ;)

  • 31 months ago
  • 0 points

my eyes... they burn

  • 31 months ago
  • -1 points

Your hurting the system with that cable mess it can over heat your parts and just make your rig look like garbage its got decent parts that you spent decent money on so if i were you i would take more care of it or it will not perform right

  • 31 months ago
  • 2 points
  • 30 months ago
  • 1 point

If you'd looked a little harder you would have noticed it's an older pic. Old 8350 and older cooler ;) the cables are managed alot better now I assure you :) Btw it performs amazing, it would take a hell of a lot of cable mess to screw up performance.

[comment deleted]
  • 30 months ago
  • 1 point

< 5 Idle, 30 under load with prime 95.

[comment deleted]
  • 30 months ago
  • 1 point

I was skeptical about the temps knowing not to trust just one monitor, but the room I use is cold which does factor and that the cooler is mounted on the outside so I dunno it runs cool either way :)

http://imgur.com/R9yieVT http://imgur.com/4dIPeNW http://imgur.com/Sj3J0Zq

  • 30 months ago
  • 1 point

Also IIRC the temps shown via software are always inaccurate and are higher, with my last cpu and cooler the temps were double what this one outputs put it down to the AIO cooler.

  • 30 months ago
  • 1 point

Have you tried amd overdrive for temp readings? I know HWmonitor works well for my fx6300 but it is very inaccurate with my parents apu.

  • 30 months ago
  • 1 point

Yeah I use open hardware monitor & HWmonitor and have done for my 6300 and 8350. checked with Overdrive everything seems normal. http://imgur.com/GghyURD http://imgur.com/SRP85Ho http://imgur.com/o4Tp2Cu http://imgur.com/PPCE7mm

[comment deleted]